AQUA-15
Model
FGW-15E (A)
 Drilling depth  100m ※
 Drill pipe
  (diameter×length)
 73.1mm (KOKEN F7B)×3m
  or 88.9mm (KOKEN F9B)×3m
  or 101.6mm (KOKEN F10B)×3m
 Borehole diameter  In hard rock (air drilling with down the hole drill) 4-10 in
 Drill head   Speed range : 0-16 rpm , torque : 4,450 Nm
 Feed  Pull up : 60kN,
 Pul down : 60kNl
 Stroke : 3,790mm
 Hydraulic power pack  5.5kw
 Rig gross weight  Approx 3,000kg
 ※(Depends on geological conditions and skills of operators)
SSD-3000 SSD-2000
Model
SSD-3000
SSD-2000
SSD-1200
 Rated capacity
 m
 3,000  2,000  1,200
 Mast  Load capacity
 kN
 750  600  400
 Height from ground
 mm
 16,000  11,800
 11,800
 Raising system  Two hydraulic cylinders
 Drill head  Load capacity
 kN
 500  300  200
 Driving system  Two speed hydraulic motor
 Spindle inside
 diameter
 mm
 110
 Revolution(Low)
 rpm
 0-40
 Revolution(high)
 rpm
 0-80
 Max torque
 kN-m
 1.2(at Low)
 Pull down  Driving system  Hydraulic cylinder and wire rope
 Thrust(pull)
 kN
 500  300  200
 Thrust(push)
 kN
 100
 Travelling speed
 m/min
 3.5
 First travelling speed
 m/min
 30
 Travelling stroke
 mm
 11,000  8,000  8,000
 Rod breaker system  Driving system  Double clamp system
 Capacity
 N-m
 20,000  20,000  17,000
 Power unit  Power
 PS/rpm
 274/1,800  274/1,800  226/1,800
 Weight
 kg
 4,200
  (at dry)
 4,500  3,500
 Dimensions (L×W×H)
 mm
 9,000×2,400×
 1,700
 12,000×2,300×
 2,375
 1,200×2,300×
 2,375
 Weight (except power unit)
 kg
 Approx 20,000  Approx 13,800  Approx 10,000
 
 
Copyright (C) 2006 KOKEN BORING MACHINE CO.,LTD. All Right Reserved